Setting a user code on your Schlage keypad lock involves following a specific sequence of button presses and entering the desired code. Based on the provided information, here are the steps you need to follow to program a user code into your lock.
Programming a User Code
This process allows you to add or change a 4 to 8 digit code that can be used to unlock your Schlage keypad lock. It is important to follow the steps precisely to ensure the code is set correctly.
Step-by-Step Guide
To set your new user code, follow these steps:
- Start by entering your current Code.
- Then press the number 1.
- Immediately follow by pressing the Enter button.
- Enter your new 4 to 8 digit user code once.
- Enter the new code again to confirm the code.
Confirming Successful Programming
Once you have completed the steps above, your lock will provide feedback to indicate whether the programming was successful.
- If your programming was successful, the lock will show a green check mark.
- The green check mark will blink.
- The lock will also beep twice.
If you do not receive this confirmation, the programming may not have been successful, and you should repeat the steps.
Quick Reference Table
| Step | Action | Confirmation |
|---|---|---|
| 1 | Enter current Code | |
| 2 | Press 1 then Enter | |
| 3 | Enter new code once | |
| 4 | Enter new code again | Green check mark blinks, beeps twice (if successful) |
Following this procedure helps ensure your Schlage keypad lock is set up with your desired user codes for convenient access.
