Using Quick-Fix Window & Door Sealing Tape, based on the provided reference, focuses on the final steps of application after the tape has been partially positioned. This involves ensuring the remaining section adheres properly to create a reliable seal.
According to the reference, once the tape is partially in place, the subsequent actions are:
- Remove the remaining half of release liner: Peel away the protective backing from the adhesive surface that has not yet been applied.
- Press into place: Firmly push the newly exposed adhesive section of the tape onto the surface you are sealing.
- Roll the quick fix surface to assure adhesion: Use a roller to apply firm, even pressure across the entire surface of the tape. This rolling action is crucial as it helps to activate the adhesive, eliminate air pockets, and ensure complete and strong contact with the substrate, thereby assuring proper adhesion.
In the context of the referenced video, it is noted that the house wrap was already installed before the quick fix sealing tape was applied.
Summary of Application Steps (Based on Reference)
The key actions for using the tape described in the reference can be summarized as follows:
| Step | Action Detail | Purpose |
|---|---|---|
| Liner Removal | Peel off the last half of the release liner. | Expose adhesive |
| Tape Placement | Press the tape firmly onto the application area. | Initial bond |
| Surface Rolling | Use a roller on the tape's surface. | Ensure strong, full adhesion |
Following these steps helps ensure the quick fix sealing tape performs effectively by achieving maximum contact and bond strength with the underlying surface.
