To pair your Sena 10S headset with your smartphone via Bluetooth, follow these simple steps based on the standard pairing procedure.
Pairing your Sena 10S allows you to connect wirelessly to your mobile phone for hands-free calls, listening to music, and using navigation apps directly through your headset.
Easy Steps for Sena 10S Phone Pairing
The process is quick and utilizes specific buttons on your Sena 10S headset.
Here is a breakdown of the steps:
- Prepare the Headset: Ensure your Sena 10S headset is powered off.
- Initiate Pairing Mode: While the headset is off, press and hold the Phone Button and the Jog Dial simultaneously. Keep holding them until you hear a specific voice prompt indicating that the headset is ready for phone pairing. The voice prompt you should listen for is, “Phone pairing.” At this point, the headset is discoverable by other Bluetooth devices.
- Search on Your Smartphone: On your smartphone, navigate to the Bluetooth settings. Activate Bluetooth if it is not already on and search for available devices. Your phone will scan the vicinity for Bluetooth devices in pairing mode.
- Select Your Headset: In the list of detected devices on your phone's screen, you should see the "10S" listed. Select the 10S from this list. Your phone and the Sena 10S headset will then complete the pairing process.
Once successfully paired, your Sena 10S will connect to your smartphone automatically whenever both devices are on and within range.
