Setting a double coil spring trap is a straightforward process, particularly with smaller sizes. The key steps involve manipulating the springs, the jaw, the dog, and the pan to prepare the trap for deployment.
Understanding the Basics
Double coil spring traps utilize powerful springs to close the jaws quickly and securely when triggered. Learning how to properly set the trap ensures it is safe to handle during the setting process and effective once placed. As noted in the reference, setting these traps is pretty simple matter especially with the smaller sizes.
Step-by-Step Setting Process
Based on the provided reference, the process for setting a double coil spring trap can be broken down into a few simple actions:
- Flip Down the Springs: Begin by manipulating the double coil springs and pressing them down into the set position.
- Bring the Dog Over the Jaw: Position the dog (a small lever attached to the frame) so that it can engage with the pan mechanism. Bring it come over the jaw with the dog.
- Set the Dog Underneath the Pan: Carefully engage the end of the dog lever with the pan. The reference states you Set it underneath the pan. This holds the jaws open under spring tension.
Once these steps are completed, the trap is set and you're ready to go. The pan is now the trigger; applying pressure to it will release the dog, allowing the springs to drive the jaws shut.
Following these steps, derived directly from the reference, allows you to safely and effectively set a double coil spring trap.
