To install a Redi Shade outside mount using the method described in the provided reference, you will utilize the shade's adhesive backing. The process involves preparing the shade, pressing it firmly onto the desired surface outside your window frame, and allowing time for the adhesive to cure.
Installing Redi Shade Outside Mount Using Adhesive
Based on the information from the reference, a common method for installing certain Redi Shades, such as Easy Lift shades, for an outside mount relies on a pre-applied adhesive strip. This allows for a quick and tool-free installation directly onto the mounting surface.
This approach, as detailed in the reference, focuses on the final steps of attaching the shade securely using its adhesive.
Step-by-Step Installation
Follow these steps for installing your Redi Shade outside mount using the adhesive method:
- Prepare the Shade: Locate the adhesive strip on the back of the shade near the top. Carefully pull the protective backing off the adhesive strip.
- Position and Press: Align the shade precisely where you want it mounted outside your window frame. Once aligned, press the shade firmly against the surface along the entire length of the adhesive strip. Applying strong, even pressure helps ensure a good bond.
- Allow Adhesive to Cure: After pressing the shade into place, leave it undisturbed for approximately 30 minutes. This allows the adhesive sufficient time to bond securely to the mounting surface before any stress is applied by pulling the shade down.
Note: The reference specifically highlights pulling the adhesive off, pressing firmly, and allowing 30 minutes for curing.
Ensuring the surface is clean and suitable for adhesive mounting is generally recommended for the best results, though not explicitly mentioned in the provided reference snippet. The key to a successful outside mount with this method, as shown, is the firm application of pressure and respecting the curing time.
