Using a sharp edge tester involves a specific procedure to determine the sharpness of an edge. Based on the reference provided, here's a breakdown of how to use an Edge-On-Up Edge Sharpness Tester:
Steps for Using a Sharp Edge Tester
Here's how to use the tester, based on the video description:
-
Zero Out the Tester: Before each test, it's crucial to zero out the sharp edge tester. This ensures an accurate reading. There should be a button or mechanism to accomplish this.
-
Position the Test Media: The tester utilizes test media that breaks under a certain pressure, indicating sharpness.
-
Place in the Pivot Point: Position the edge to be tested against the pivot point of the tester.
-
Slowly Apply Pressure: Gently and gradually bring the tester down onto the edge being tested.
-
Observe Until Media Breaks: Continue applying pressure until the test media breaks or is cut through by the edge.
-
Read the Measurement: Once the media breaks, the tester will display a reading, typically in grams of pressure. For instance, the reference mentions a reading of 213 grams of pressure. This value indicates the force required to break the media, thus quantifying the sharpness of the edge.
Example
Imagine testing the blade of a knife. You would:
- Zero out the tester.
- Position the knife blade at the pivot point.
- Slowly lower the tester.
- Observe the point at which the test media breaks.
- Note the reading on the tester (e.g., 213 grams).
