How do you remove a shower water drain?

To remove a shower drain cover, you need to loosen the screws holding it in place.

Steps to Remove a Shower Drain

Here's a step-by-step guide to safely remove your shower drain cover, based on the provided reference:

1. Locate the Screws:

   • Look for screws around the perimeter or in the center of the drain cover. These are typically flathead or Phillips head screws.

2. Loosen the Screws:

   • Using the appropriate screwdriver, carefully turn the screws counterclockwise to loosen them.
   • Be gentle to avoid stripping the screws. If they are too tight, a bit of penetrating oil might help.

3. Remove the Drain Cover:

   • Once the screws are loose, you should be able to lift the drain cover straight up and out of the shower drain. If it doesn’t lift out easily, check if all the screws are fully loosened and try wiggling it gently.

Additional Tips

• If the drain cover is stuck, a thin blade (like a putty knife) can be inserted between the edge of the drain and the cover to help break the seal.
• Always be cautious not to drop the screws down the drain.