To put a Smart Life switch into pairing mode, press and hold the power button for seven seconds until the LED flashes quickly. Then, immediately hold it down for another seven seconds. The LED should then flash slowly. This slow flashing indicates that the switch is in pairing mode and ready to connect to the Smart Life app.
Here's a step-by-step breakdown:
-
Locate the Power Button: Identify the power button on your Smart Life switch. This is typically the main button used to turn the switch on and off manually.
-
Initial Long Press: Press and hold the power button for seven seconds. Observe the LED indicator light. It should begin to flash quickly.
-
Second Long Press (Immediate): Immediately after the initial fast flashing begins, continue holding the power button for another seven seconds.
-
Observe Slow Flashing: Release the power button. The LED indicator light should now be flashing slowly. This slow flashing confirms that the switch has successfully entered pairing mode.
-
Pairing with the App: Open the Smart Life app on your smartphone or tablet. Follow the app's instructions to add a new device. The app should detect the Smart Life switch in pairing mode, allowing you to complete the setup process.
If the LED doesn't flash or the flashing pattern is different, consult the specific user manual for your Smart Life switch model for detailed instructions. The process might vary slightly depending on the manufacturer and model.
