To adjust soft close hinges, you'll typically find a small, gray or silver plunger in the center of the hinge. This plunger is the adjustment tab.
Here's how to adjust soft close hinges:
- Locate the adjustment tab: Look for the small gray or silver plunger in the center of the hinge.
- Use a Phillips screwdriver: The adjustment tab can usually be adjusted using a standard Phillips screwdriver.
- Make small adjustments: It's essential to make gradual adjustments and test the hinge after each turn.
- Adjust for desired closing speed:
- Turning the screw clockwise increases the closing force, resulting in a faster closing speed.
- Turning the screw counterclockwise decreases the closing force, resulting in a slower closing speed.
Here are some additional tips for adjusting soft close hinges:
- Consider the door size and weight: Smaller doors may require less closing force than larger, heavier doors.
- Check for any obstructions: Make sure the door is not hitting anything that could be preventing it from closing properly.
- Replace worn-out hinges: If the adjustment tab doesn't seem to work, the hinge might be worn out and need replacement.
Remember, soft close hinges are delicate, so use caution when adjusting them. Always make small adjustments and test the hinge after each turn to ensure it's working correctly.
