Pairing your Soundcore P40 earbuds involves two main methods: manually initiating Bluetooth pairing mode, typically for the initial connection or re-pairing, and using simultaneous pairing to connect to a second device for multipoint connectivity.
Here's a breakdown of how to pair your Soundcore P40 earbuds:
Standard Bluetooth Pairing (Manual Method)
This method is often used for the first time you connect your earbuds to a device or if you need to manually put them into pairing mode.
- Ensure the earbuds have sufficient battery.
- Place the Soundcore P40 earbuds into their charging case.
- Keep the charging case open.
- The earbuds should enter Bluetooth pairing mode, indicated by a flashing light on the case or earbuds (consult your user manual for specific light indicators).
- On your device (smartphone, tablet, computer), go to your Bluetooth settings.
- Look for "Soundcore P40" (or a similar name) in the list of available devices and select it to connect.
Pairing with a Second Device (Simultaneous/Multipoint Pairing)
The Soundcore P40 supports connecting to two devices simultaneously (multipoint). To connect to a second device after you are already connected to the first one:
- Ensure the earbuds are already connected to the first device.
- While wearing the earbuds, press and hold the touch control area on both earbuds for 3 seconds.
- You will hear a voice prompt indicating that the earbuds are "entering pairing mode".
- Go to the Bluetooth settings on your second device.
- Find "Soundcore P40" in the list of available devices and select it to connect.
Your Soundcore P40 earbuds should now be connected to both devices simultaneously, allowing you to seamlessly switch audio sources.
Pairing Methods Summary
| Method | Purpose | How to Initiate | Location | Indicator |
|---|---|---|---|---|
| Standard/Manual Pairing | First connection, Re-pairing | Place earbuds in case, leave case open | Charging Case | Flashing light (check manual) |
| Simultaneous/Multipoint | Connecting to a Second Device | While wearing, press & hold touch control on both earbuds for 3 seconds | On Earbuds | "Entering Pairing Mode" voice prompt |
Tips for Successful Pairing
- Make sure Bluetooth is enabled on the device you are trying to pair with.
- Keep the earbuds and the device close to each other during the pairing process.
- If pairing fails, try turning Bluetooth off and on again on your device, or restarting the device.
- Ensure the earbuds are charged.
- You may need to "Forget" or "Unpair" the earbuds from a device's Bluetooth list before attempting to re-pair.
Following these steps, you should be able to easily pair your Soundcore P40 earbuds to your desired devices.
