Turning on the jets to their powerful setting in a spa or jacuzzi typically involves activating the jet pump, often controlled by a specific button on the control panel. Based on the provided information, achieving the "strong" setting requires following a specific sequence of button presses.
Steps to Activate Strong Spa Jets
According to the reference, the process for activating and cycling through jet speeds using a specific control button involves multiple presses. To reach the higher, "strong" jet setting, you need to press the button more than once.
Here are the steps, utilizing the information provided:
- Initial Activation (Low Speed):
- Press the JETS1 button to turn on the pump, then let it run for 10 seconds.
- Initially, the pump should be running on its low speed setting. This gets the water circulating and the pump started.
- Activating the Strong Setting (High Speed):
- Press the JETS1 button again.
- Let the pump run on the high speed for 10 seconds. This high-speed setting is typically what provides the powerful, "strong" jet action in the jacuzzi.
- Turning Off the Jets (Optional):
- Press the JETS1 button again to turn off the pump.
- After enjoying the strong jets, a third press of the same button will usually shut down the pump completely.
This sequence demonstrates how a single button can cycle through different speeds (off -> low -> high -> off), with the second press activating the high-speed, or "strong," jet setting.
Summary of JETS1 Button Actions
For clarity, here's a table summarizing the actions of the JETS1 button based on the reference:
| Button Press | Action | Jet Speed | Duration (per reference) |
|---|---|---|---|
| 1st Press | Turn on Pump | Low Speed | 10 seconds |
| 2nd Press | Switch to High Speed | High Speed | 10 seconds |
| 3rd Press | Turn off Pump | Off | N/A |
Note: While the reference specifies 10 seconds for observing the speed, you can typically leave the pump running at high speed for your desired duration before pressing the button again to turn it off.
Understanding your specific spa's control panel is key, as button names and sequences can vary between models. However, this example illustrates a common method for controlling jet power using a single button that cycles through speeds.
