To refill a deluxe ink stamp, which is typically a self-inking model, you will need to access and re-ink the internal stamp pad.
Refilling your self-inking or deluxe ink stamp involves adding fresh ink directly to the existing ink pad within the stamp unit. This process is straightforward and can extend the life of your stamp significantly.
Steps to Refill Your Deluxe Ink Stamp
Based on the provided reference, refilling a self-inking stamp involves these key actions:
- Position the Stamp: Place the stamp in a stable position, ready to access the ink pad.
- Grab the Pad Tabs: Locate and firmly grasp the two tabs typically found on the sides of the stamp pad.
- Remove the Pad: Carefully pull the pad straight out from the stamp unit using the tabs.
- Apply Ink: Using your bottle of self-inking stamp ink, put about three to four drops of ink across the pad. Distribute the drops evenly.
- Let Soak: Allow the ink to soak in for a few seconds. This helps the ink absorb properly into the pad material.
- Reinsert the Pad: Once the ink has soaked in, carefully slide the ink pad back into its original position within the stamp unit until it clicks into place.
It's important to use the correct type of ink designed for self-inking stamps, as other inks can damage the pad or the stamp mechanism. You should see a noticeable improvement in the stamp's impression quality after refilling.
Quick Reference Table
| Step | Action | Detail Based on Reference |
|---|---|---|
| 1. Access | Remove the ink pad | Grab the two tabs and remove the pad |
| 2. Ink | Apply new ink | Put 3-4 drops across the pad |
| 3. Absorb | Let ink soak | For a few seconds |
| 4. Reassemble | Reinsert the pad (Implied) | Slide pad back into stamp |
Refilling is a simple maintenance task that keeps your deluxe or self-inking stamp performing optimally.
