Removing a tree stump using a drill typically involves preparing the stump to accept chemicals or flammable liquids that help in its decomposition or burning. The drill creates holes that act as reservoirs, allowing the substance to penetrate deep into the wood.
A drill is a key tool in chemical or burning methods for stump removal. It's used to create the necessary pathways within the stump.
Step-by-Step Method Using a Drill
The core technique involves drilling holes into the stump. According to the reference, you should drill holes into the stump with a drill and a large bit. The size of the bit is important as it determines the volume of the holes, allowing more of the chosen substance to be applied.
After drilling, you can proceed with either a chemical treatment or a burning method facilitated by kerosene.
Method 1: Using a Drill with Chemicals
- Drill Holes: Use a drill and a large bit to make multiple deep holes across the top of the stump and potentially angled into the sides.
- Apply Chemical: apply Stump Out chemical granules.
- Add Water: then fill the holes with water. The water helps dissolve and activate the chemical granules, allowing them to soak into the wood and accelerate decomposition.
Method 2: Using a Drill with Kerosene
- Drill Holes: As with the chemical method, drill holes into the stump with a drill and a large bit.
- Soak with Kerosene: Slowly pour kerosene over the stump, taking care not to allow the fluid to run off and pool on the ground. The holes help the kerosene penetrate the stump, making it easier to burn later (though the reference only mentions soaking, not the burning step itself).
Summary Table of Drill-Based Methods
| Method | Drill Use | Subsequent Action |
|---|---|---|
| Chemical | Drill deep holes with a large bit | Apply chemical granules (Stump Out), fill holes with water |
| Kerosene | Drill deep holes with a large bit | Slowly pour kerosene over the stump |
Using a drill to create holes is a preparatory step that significantly enhances the effectiveness of chemical or burning methods by allowing the active agents to reach deeper into the stump's core. This speeds up the process of decay or makes the stump more susceptible to burning.
