Cleaning a water filter tap, especially when experiencing low pressure, often involves addressing the filter within the tap itself. The provided YouTube video ([Part of a video titled How to fix your low pressure tap by Cleaning the tap filter - YouTube]()) gives a basic approach that can be applied to various taps around your house.
Here's a breakdown of the cleaning process:
-
Identify the Filter: Most water filter taps have a small filter or screen located at the end of the tap. This is the area that commonly gets clogged.
-
Disassemble (If Necessary): Depending on the tap design, you might need to unscrew a part of the tap to access the filter. Be careful not to damage any components during disassembly.
-
Remove the Filter: Carefully remove the filter screen from the tap.
-
Clean the Filter:
- Manual Cleaning: Use your fingers to gently rub away any accumulated debris or sediment from the filter screen, as suggested in the YouTube video. The video emphasizes that you can simply clean it out with your hands.
- Rinsing: Rinse the filter thoroughly under running water to remove any remaining particles. For stubborn buildup, consider using a soft brush.
-
Reassemble: Once the filter is clean, reinsert it back into the tap and reassemble any parts you disassembled earlier.
-
Test: Turn on the tap and check the water pressure. If the low pressure issue was due to a clogged filter, you should see an improvement.
Important Considerations:
- Type of Tap: While the general principle applies to many taps (sink, laundry, bath), specific designs may vary.
- Severity of Clogging: If the filter is heavily clogged or damaged, you might need to replace it instead of cleaning it.
