To stick wall tiles, you generally prepare the surface, apply adhesive to the tile, and press it firmly onto the wall. Based on the provided reference, a specific method involves removing old adhesive, applying adhesive to the tile's corners and middle, and pressing it onto the wall.
When undertaking a tiling project, proper preparation is key. Before applying new tiles, ensuring the wall surface is ready is a crucial first step.
Preparing the Wall
Based on the reference, the initial step in sticking wall tiles is surface preparation, specifically focusing on removing old material.
- Remove Old Adhesive: You must remove any existing adhesive off the wall from the old tile. This ensures a clean and smooth surface for the new tile to adhere to properly.
Checking the Fit
After cleaning the wall surface, it's important to verify that the new tiles will sit correctly.
- Check Tile Fit: To check if you've removed enough old adhesive and the surface is ready, put a dry tile in to see if it fits flush against the wall.
Applying Adhesive to the Tile
The reference specifies a particular method for applying adhesive directly to the back of the tile rather than the wall.
- Adhesive Application: Apply adhesive to the four corners of the tile, and a little bit in the middle. This targeted application method is described for securing the tile.
Sticking the Tile to the Wall
Once the adhesive is on the tile, the final step is placing it on the prepared wall surface.
- Press and Hold: Press the tile against the wall and hold it for a little while. This allows the adhesive to grip the wall and secure the tile in place.
This process, starting with removing old adhesive and checking the fit, then applying adhesive to the tile's corners and middle, and finally pressing and holding the tile against the wall, outlines how to stick wall tiles according to the referenced method.
