Installing a floor trampoline, also known as an in-ground trampoline, primarily involves preparing the site by digging a hole, assembling the trampoline frame, and then placing the trampoline securely into the ground cavity.
Transforming your backyard with an in-ground trampoline creates a seamless, aesthetically pleasing, and often safer bouncing area. The installation process is straightforward, following key steps to ensure the trampoline fits perfectly and is safe for use.
Step-by-Step Installation Guide
Based on common practices and the provided reference, here are the essential steps to install your floor trampoline:
1. Dig the Hole
The first critical step is preparing the ground.
- Mark the area: Carefully mark out the footprint for your trampoline hole.
- Size it right: Dig a hole that is a few inches wider in diameter than your trampoline. This extra space allows for easier placement and adjustment.
- Consider depth: The depth will vary depending on your trampoline model and required bounce clearance, but generally, it needs to be deep enough for the mat to drop significantly during bouncing without hitting the bottom.
2. Assemble the Frame
While the hole is being dug or prepared, you can work on assembling the trampoline itself.
- Assemble the frame according to the manufacturer's instructions. This typically involves connecting the metal frame sections.
- Attach the springs: Once the frame is together, attach the springs to the frame and the jumping mat.
3. Site the Trampoline into the Hole
With the hole ready and the trampoline frame assembled, it's time to put it in place.
- Site the trampoline into the hole. Carefully lower the assembled trampoline frame (with the mat and springs attached) into the dug cavity.
- Adjust placement: Ensure the frame sits level around the edge of the hole. Adjust the hole or frame position as needed for a perfect fit.
4. Attach the Vented Pads
Safety and air circulation are key for in-ground trampolines.
- Attach the vented pads around the edge of the trampoline frame, covering the springs.
- Why vented? Vented pads allow air to escape from the hole underneath the trampoline mat when someone lands, preventing the "airbag" effect which can hinder bounce and potentially damage the trampoline.
5. Jump!
Once all components are securely in place and the installation steps are completed, your floor trampoline is ready for action.
- Jump! Enjoy your new in-ground trampoline.
Following these steps ensures a proper and secure installation, leading to countless hours of fun. Always consult your specific trampoline model's installation manual for detailed instructions and safety guidelines tailored to your product.
