Using your Shark Navigator vacuum involves selecting the appropriate mode for your floor type and engaging the brush roll. Based on the provided reference, here's how to adjust the settings and use the brush roll for cleaning.
Operating Your Shark Navigator: Selecting Floor Modes
Your Shark Navigator typically has different settings controlled by a power switch to accommodate various floor surfaces. A key action for engaging the brush roll in either setting is tilting the handle back.
Here's a breakdown based on the reference:
- Turn on the vacuum: Locate the power switch.
- Select your cleaning mode:
- For a slower brush roll speed (often used for hard floors or delicate rugs, though the reference doesn't specify the floor type for this setting), push the power switch to the first setting.
- For a faster brush roll speed (ideal for cleaning carpets), push the power switch to the second setting.
- Engage the brush roll: Once the vacuum is on and you've selected your desired setting, tilt the handle back.
- In the first setting, when you tilt the handle back, the brush roll will spin slowly.
- In the second setting, when you tilt the handle back to engage the brush roll, the brush roll will spin quickly.
By following these steps, you can turn on your Shark Navigator, select between a slower or faster brush roll speed using the power switch, and activate the brush roll by tilting the handle back, as demonstrated in the reference provided. Remember to choose the setting appropriate for your cleaning needs.
