To clean a Shark stick vacuum, you'll need to empty the dust cup and clean the filters and brushroll.
Here's a breakdown of the cleaning process:
-
Empty the Dust Cup:
- Locate the dust cup release button (often near the handle or on the body of the vacuum).
- Press the button to detach the dust cup.
- Hold the dust cup over a trash can and press the release button to empty the contents.
-
Clean the Filters:
- Shark stick vacuums usually have multiple filters (foam and felt filters, and sometimes a HEPA filter).
- Locate the filter compartment (typically near the dust cup or motor).
- Remove the filters.
- Tap the filters against a trash can to remove loose dust and debris.
- Rinse the foam and felt filters with water. Allow them to air dry completely (usually 24 hours) before reinstalling. Important: Never operate the vacuum without completely dry filters.
- HEPA filters should generally not be washed. Instead, gently tap them clean or use a soft brush. Replace as needed.
-
Clean the Brushroll:
- Depending on your Shark model, the brushroll may be self-cleaning or require manual cleaning.
- For self-cleaning brushrolls: Check the vacuum's manual for specific instructions.
- For manual cleaning:
- Turn off and unplug the vacuum.
- Locate the brushroll access panel (usually on the vacuum head).
- Remove the brushroll.
- Use scissors or a seam ripper to carefully cut away any hair or string wrapped around the brushroll.
- Wipe the brushroll clean with a damp cloth.
- Remove any debris from the brushroll housing.
- Reinstall the brushroll.
-
Clean the Nozzle and Hose (if applicable):
- Inspect the nozzle for any clogs or obstructions. Remove any debris.
- If your model has a hose, detach it and check for blockages. You can use a broom handle or similar object to push through any obstructions.
-
Wipe Down the Exterior:
- Use a damp cloth to wipe down the exterior of the vacuum cleaner.
Remember to consult your Shark stick vacuum's owner's manual for specific cleaning instructions for your particular model. Regular cleaning will help maintain the vacuum's performance and extend its lifespan.
