To clean your Bissell Cleanview Rewind pet vacuum based on the provided steps, you will focus on emptying the dirt tank and cleaning the cyclone.
Cleaning your vacuum's dirt tank and cyclone is essential for maintaining optimal performance and suction power. Dirt, pet hair, and debris can clog internal components, reducing effectiveness. Following these simple steps ensures your vacuum continues to capture pet messes efficiently.
Essential Cleaning Steps
Cleaning your Bissell Cleanview Rewind involves a couple of key areas according to the provided information:
- Remove & Empty Dirt Tank: The first step is to disconnect the dirt tank from the vacuum unit and empty its contents into a trash bin. This should be done regularly to prevent overfilling and loss of suction.
- Remove and Clean the Cyclone: Inside the dirt tank assembly is the cyclone separator.
- Remove the Cyclone by twisting it to the left to disconnect and remove it.
- The Cyclone can be washed and rinsed with water.
- After washing, it is crucial to allow the Cyclone to completely air dry. This drying process takes a significant amount of time, typically 24 to 48 hours, before you can reinstall it.
Understanding the Parts
Here's a quick look at the components mentioned and their cleaning needs:
| Component | Cleaning Action | Notes |
|---|---|---|
| Dirt Tank | Remove and Empty | Do this frequently. |
| Cyclone | Remove, Wash, Rinse, Air Dry | Twist left to remove. Requires 24-48 hrs to dry. |
Properly cleaning these components helps ensure your Bissell Cleanview Rewind is ready to tackle tough pet messes every time you use it. Remember the long drying time required for the cyclone to prevent moisture issues.
