To change the roller brush on a Shark vacuum, you'll need to access the brush roll, remove the cover, and then slide the brush roll off. Here’s a step-by-step guide based on the provided reference:
Steps to Change Your Shark Vacuum's Roller Brush
-
Access the Brush Roll: Locate the area on your Shark vacuum where the roller brush is housed. Typically, it is located on the floor nozzle.
-
Remove the Cover: In order to get to the brush roll, you must first remove the cover that protects it. According to the reference, you will need to apply upward force to lift the cover.
-
Slide Off the Brush Roll: Once the cover is off, you'll be able to access the brush roll. Simply apply upward force and slip the roller brush off the belt.
- Make sure to note the orientation of the brush roll for easy reinstallation.
- Inspect the area for any debris that might be hindering the rotation of the brush or causing wear.
Summary
| Step | Action |
|---|---|
| 1. Access | Locate the brush roll area. |
| 2. Cover Removal | Apply upward force to lift the cover. |
| 3. Brush Roll Removal | Apply upward force and slip the brush roll off the belt. |
By following these steps, you should be able to easily replace the roller brush on your Shark vacuum.
