Thinning MSA varnish with a suitable solvent involves careful mixing to achieve the desired consistency.
The Process of Thinning MSA Varnish
To effectively thin MSA varnish using a solvent, follow a specific mixing procedure. The goal is to ensure the varnish and solvent are thoroughly combined into a clear, usable mixture.
Key Steps from the Reference
Based on the provided information regarding thinning MSA varnish:
- Determine the Ratio: You will need a specific ratio between the MSA varnish and the solvent. Note: The exact ratio and type of solvent are not detailed in the provided reference.
- Begin Stirring: Once the varnish and solvent are combined according to the determined ratio, begin stirring the mixture. Using a palette knife is suggested for this initial mixing.
- Observe Turbidity: Upon initial mixing, there may be a slight amount of initial turbidity. This is when the mixture appears cloudy or hazy.
- Continue Stirring Until Clear: Continue stirring the mixture at least for one minute till the mixture clarifies. Stirring ensures the varnish and solvent fully integrate, dissolving the varnish and eliminating the turbidity.
What to Expect
When thinning MSA varnish with a solvent as described, you should anticipate the mixture initially appearing slightly cloudy. Persistent stirring for at least one minute is crucial to overcome this turbidity and achieve a clear, homogeneous mixture ready for use. The reference highlights the need for stirring between the MSA varnish and solvent to reach this clarified state.
