Fitting new windscreen wipers typically involves lifting the arm away from the glass, removing the old blade, attaching the new one securely, and carefully lowering the arm back down.
Replacing windscreen wipers is a standard maintenance task that ensures clear visibility during rain or snow. The process is generally straightforward, although the exact method for releasing and attaching the blades can vary slightly depending on the vehicle model and the type of wiper arm.
Here is a general guide on how to replace your wiper blades:
1. Lift the Wiper Arm
- Carefully lift the wiper arm away from the windscreen until it stands upright.
- Caution: Be careful not to let the arm snap back against the glass, as this could cause damage. Placing a towel or piece of cardboard on the windscreen underneath the arm can provide protection.
2. Remove the Old Wiper Blade
- Examine where the wiper blade connects to the arm. Common connection types include hook, pin, bayonet, or push button.
- Identify the release clip or button.
- Press the clip/button and slide the old blade off the arm. Sometimes, you may need to angle the blade to release it.
3. Attach the New Wiper Blade
- Take the new wiper blade. It often comes with different adapters for various arm types; select the one that matches your vehicle's arm.
- Slide the appropriate end of the new blade onto the wiper arm connector.
- Push or slide the blade until it clicks into place.
4. Secure and Lower the Arm
- Click.
- Make sure it's secure.
- Rotate the wiper arm and place it back down on the windscreen.
5. Repeat for the Other Side
- Move around to the other side of the vehicle and repeat steps 1-4 for the second wiper blade.
It's always a good idea to check your vehicle's owner's manual or consult specific instructions provided with the new wiper blades, as designs can differ.
Summary Table
| Step | Action | Key Point |
|---|---|---|
| 1. Lift Arm | Gently lift wiper arm away from windscreen. | Protect glass with a towel/cardboard. |
| 2. Remove Old Blade | Locate release, press/slide to detach old blade. | Note connection type (hook, push button, etc.). |
| 3. Attach New Blade | Slide new blade (with correct adapter) onto arm. | Ensure it aligns correctly. |
| 4. Secure & Lower | Click. Make sure it's secure. Rotate and lower. | Blade must be firmly attached. |
| 5. Repeat for Other Side | Move around to the other side and repeat steps 1-4. | Both blades need replacing. |
Following these steps will help you successfully fit new windscreen wipers and maintain clear visibility.
