Veneer is typically pasted onto the core material of furniture using resin glue.
Veneer, a thin sheet of wood, is applied to a core substrate to give furniture the appearance of solid wood. The fundamental method for attaching veneer, as highlighted by the reference, involves the use of resin glue.
The process generally involves applying the resin glue evenly to either the back of the veneer sheet or the surface of the core material (like particleboard, MDF, or plywood), or sometimes both. The veneer is then carefully positioned onto the core and pressure is applied until the glue cures or dries.
Key aspects related to this process often include:
- Adhesive Type: Resin glue is commonly used due to its strong bonding properties once cured.
- Application: Glue must be spread consistently to avoid bubbles or uneven surfaces.
- Pressure: Applying firm, even pressure is crucial for a good bond across the entire surface. This can be done with clamps, presses, or vacuum bags.
- Curing Time: The time required for the glue to set varies depending on the type of resin glue, temperature, and humidity.
Considerations for Veneer Pasting
The reference notes that when exposed to heat, there are chances that this glue loosens. This is a practical consideration when using veneer furniture.
- Heat Sensitivity: Resin glues used for veneering can be susceptible to heat. Placing hot items directly on a veneered surface or exposing it to high temperatures might weaken the adhesive bond over time.
- Maintenance: Understanding this helps in properly caring for veneered furniture by avoiding excessive heat exposure to maintain the integrity of the glue line.
The exact method of applying pressure and the specific type of resin glue can vary, but the core principle remains the use of this adhesive to bond the thin veneer sheet to the underlying furniture structure.
