Hanging wallpaper horizontally on your own involves a specific process of applying adhesive, carefully positioning the strips, smoothing them to remove imperfections, cleaning up excess paste, and allowing the paper sufficient time to dry.
Based on the provided steps for hanging wallpaper:
Step-by-Step Guide to Horizontal Wallpaper Hanging
Follow these stages for a successful DIY wallpaper installation:
-
Step 1: Use Adhesive
Prepare your wallpaper strips by applying adhesive evenly to the back. A paint roller is recommended for this to ensure consistent coverage. This step is crucial for proper adhesion to the wall surface. -
Step 2: Hang the Wallpaper
Carefully position and hang the paper horizontally on the wall. As you hang subsequent strips, place them approximately 1/8-in apart from the previous one. This slight gap is intentional and helps accommodate potential shrinkage as the paper dries, preventing overlapping or buckling. -
Step 3: Smooth the Surface
Once a strip is on the wall, use a smoothing brush to gently work out any air bubbles or creases. Start from the center of the strip and brush towards the edges to achieve a smooth, flat surface against the wall. -
Step 4: Clean Up
Before the adhesive fully cures, clean up any excess paste that may have seeped out at the edges or seams. A damp cloth or sponge works well for wiping away residue from the wallpaper and surrounding areas. -
Step 5: Let Dry
Finally, allow the wallpaper to let dry completely according to the adhesive manufacturer's instructions. Avoid touching or disturbing the paper during the drying period to ensure it sets properly.
By following these steps, you can effectively hang wallpaper horizontally on your own, resulting in a neatly finished wall surface.
