The OE error on an LG washer typically indicates a drainage issue. A common cause for this error is a blockage or problem with the drain pump filter. Addressing this component is a primary step in troubleshooting and clearing the OE error.
The most frequent reason for an LG washer to display an OE error is related to improper draining. This often stems from a clogged or damaged drain pump filter. Cleaning and inspecting this filter can resolve the issue.
Here are the steps to clean and check the drain pump filter, based on common troubleshooting methods:
Step-by-Step Guide to Cleaning the Pump Filter
Resolving the OE error often involves accessing and cleaning the drain pump filter. This filter prevents lint, coins, and other small items from entering and damaging the drain pump. Follow these steps carefully:
-
Access the Filter:
- Locate the small panel at the bottom front of your LG washer.
- Open this panel (it may snap open or require a tool like a flathead screwdriver).
- You will see the drain pump filter cap. Keep a towel and a shallow pan handy, as water will likely drain out when you open it. Unscrew the filter cap counter-clockwise.
-
Clean Thoroughly:
- Once the filter is removed, rinse it under running water to remove lint, debris, and foreign objects.
- Use a brush (like an old toothbrush) to thoroughly clean off any stuck-on residue.
- Also, check the cavity where the filter sits for any blockages leading into the pump.
-
Check for Damage:
- Inspect the filter carefully for any tears or holes.
- A damaged filter might allow debris to pass through, potentially causing future blockages or pump issues. If damaged, the filter may need to be replaced.
After cleaning and inspecting, screw the filter back in securely (clockwise) and close the access panel. Run a short drain or spin cycle to see if the OE error is cleared.
Summary of Filter Cleaning Steps
| Step | Action | Purpose |
|---|---|---|
| 1. Access Filter | Open bottom panel, unscrew filter cap. | Gain access to the drainage path filter. |
| 2. Clean Filter | Rinse under water, brush off debris. | Remove blockages preventing drainage. |
| 3. Check Filter | Inspect for tears, holes, or damage. | Ensure filter functions properly and won't fail. |
Cleaning the pump filter is a key maintenance task that directly addresses one of the most common causes of the OE error on LG washing machines.
