To change the filter in your washing machine pump, you'll generally need to locate the filter, unscrew the cap, remove the old filter, clean the area, and install the new filter. Based on the provided reference, here's a more detailed outline:
-
Locate the Filter: The washing machine pump filter is usually located at the front of the washing machine, often behind a small access panel.
-
Prepare for Water Drainage: Before removing the filter, be prepared for some water to drain out. Place a shallow container or towel underneath to catch any spills.
-
Remove the Filter Cap: Grab hold of the circular filter cap. Turn it until it comes free.
-
Remove the Old Filter: Once the cap is loose, pull it out to remove the filter.
-
Install the New Filter: Put the new filter where the old one was.
Important Considerations:
- Consult your washing machine's manual: Your washing machine model might have specific instructions or variations in the filter location and removal process.
- Safety first: Always disconnect the washing machine from the power supply before performing any maintenance.
- Dealing with blockages: If the filter is difficult to remove, it might be blocked. Try gently wiggling it or using pliers to carefully extract it.
- No Hose: Remember if your washing machine doesn't have a hose as shown in the reference video.
