To clean the inside of your GE washing machine agitator, you will need to remove the fabric softener dispenser, run a wash cycle to the agitation phase, and then use a long brush to clean the interior.
Keeping the inside of your washing machine agitator clean helps maintain optimal performance and prevents buildup from fabric softener or detergent residue. This simple process, based on the provided reference, can be done periodically.
Step-by-Step Guide to Cleaning the Agitator Interior
Follow these steps precisely to clean the inside of your GE washing machine agitator:
- Remove the fabric softener dispenser: Carefully detach the fabric softener dispenser from the top of the agitator.
- Start a wash cycle: Close the washer lid and allow the machine to fill with water and proceed to the wash phase of any cycle.
- Allow agitation: Let the washer agitate for approximately 5 minutes. This ensures the inside of the agitator is exposed to water.
- Lift the lid: Open the washer lid during the agitation phase. The machine should pause.
- Clean the inside: Use a long, slender, soft brush to scrub and clean the inside surfaces of the agitator column. The water inside will help rinse away any residue as you brush.
After cleaning for a few minutes, you can close the lid to allow the cycle to complete, which will rinse and drain the machine.
By following these steps, you can effectively clean the inside of your GE washer agitator and keep it free from gunk and residue.
