Adjusting the flow on a Halsey Taylor water fountain is a straightforward process that primarily involves accessing and turning a screwdriver slot on the valve bracket. It's crucial to perform this adjustment at the correct stage, ideally before the push bar is installed.
Understanding the Importance of Water Fountain Flow
Proper water flow is essential for user comfort, hygiene, and efficient operation of a Halsey Taylor water fountain. An optimized stream height prevents splashing while ensuring users can easily hydrate. Too low a flow can be inconvenient, while excessively high flow can lead to waste and mess.
Step-by-Step Flow Adjustment Process
To adjust the stream height on your Halsey Taylor water fountain, follow these precise steps:
- Access the Valve Bracket: Begin by carefully removing the cover and button located on the valve bracket. This will expose the internal adjustment mechanism.
- Locate the Adjustment Slot: Identify the screwdriver slot on the valve. This is the point of adjustment for the water stream.
- Adjust Stream Height: Using a suitable screwdriver, turn the slot. A clockwise adjustment to the screwdriver slot increases the stream height. Turn incrementally and test the flow as needed until the desired height is achieved.
- Reassemble Components: Once the flow is satisfactorily adjusted, reassemble the cover and button back onto the valve bracket, ensuring they are securely fitted.
Crucial Note for Installation
It is vitally important to heed the following instruction regarding the timing of this adjustment:
- NOTE: Flow must be adjusted before push bar is installed.
This means that if you are installing a new valve bracket or a new fountain, the flow adjustment should be completed prior to attaching the push bar. After the flow is set, you can then install the push bar onto the new valve bracket. Performing the adjustment beforehand ensures easier access and prevents the need for disassembly once the fountain is fully assembled.
Key Components for Flow Adjustment
For clarity, here's a quick overview of the parts involved in the flow adjustment process:
| Component | Role in Adjustment |
|---|---|
| Valve Bracket | Houses the adjustment mechanism. |
| Cover & Button | Must be removed to access the adjustment slot. |
| Screwdriver Slot | The point where the adjustment is made (clockwise to increase flow). |
| Push Bar | Should be installed after the flow adjustment is complete. |
By following these instructions precisely, you can effectively adjust the flow on your Halsey Taylor water fountain, ensuring optimal performance and user experience.
