To remove air from a water pump motor, you'll need to bleed the air out of the system. Air trapped inside the pump can cause damage to internal components and reduce the pump's efficiency. Here's how:
Steps to Bleed Air from a Water Pump Motor
-
Locate the Air Bleed Valve: This valve is usually located on the pump housing. It may look like a small screw or a petcock valve.
-
Prepare for Water Release: Have a container or rag ready to catch any water that comes out when you open the valve.
-
Open the Air Bleed Valve: Slowly open the valve. You should hear air escaping.
-
Wait for Steady Water Flow: Continue to let air escape until water flows out of the valve in a steady stream, free of air bubbles. This indicates that all the trapped air has been purged from the pump.
-
Close the Valve: Once a steady stream of water is flowing, close the air bleed valve securely.
-
Check Pump Performance: Turn on the pump and observe its performance. The flow rate should be improved, and the pump should operate more smoothly.
Why is Removing Air Important?
As stated in the reference material, trapped air can damage internal components and decrease the flow rate. Regular maintenance, including bleeding air from the pump, is crucial to prevent future issues.
Pro Tip
If the pump continues to have air issues, check the suction line and connections for any leaks that may be drawing in air.
