Lowering the pressure in your water tank involves adjusting the pressure switch after draining some water. Here's a breakdown of the process, based on the provided reference:
The overall process involves the following steps:
- Drain the tank of water. This reduces the pressure, allowing you to safely work on the system.
- Find your pressure switch. This is the device that controls the pump based on the water pressure.
- Remove the pressure switch's cover. This provides access to the adjustment mechanism.
- Examine the pressure switch. Identify the components used for adjusting the pressure settings.
- Adjust the pressure settings with a wrench. Typically, there are nuts or screws that you can turn to change the pressure settings. Turning them one way will increase the pressure, and the other way will decrease it. Make small adjustments and check the pressure gauge frequently.
- Reset the well tank's pressure. This involves allowing the tank to refill and observing the new pressure settings to ensure they are within the desired range.
Here's a more detailed table summarizing the steps:
| Step | Description |
|---|---|
| 1. Drain Tank | Reduce pressure for safety and accurate adjustments. |
| 2. Locate Switch | Find the pressure switch connected to the tank. |
| 3. Open Switch | Carefully remove the cover to expose adjustment screws/nuts. |
| 4. Inspect Switch | Understand which screws control pressure settings. |
| 5. Adjust Pressure | Use a wrench to make small adjustments to lower pressure. |
| 6. Test & Reset | Allow the tank to refill and monitor pressure gauge. |
Important Considerations:
- Safety First: Always turn off the power to the pump before working on the pressure switch to avoid electrical shock.
- Small Adjustments: Make small adjustments and check the pressure gauge frequently. Over-adjusting can cause problems.
- Professional Help: If you are not comfortable working with electrical or plumbing systems, consult a qualified professional.
