Removing excess wax from waxed cotton fabric is a straightforward process that primarily involves applying heat and wiping the wax away. This method is particularly useful if you've applied too much wax during a re-proofing session.
Here's the exact method to remove excess wax:
Simple Method for Removing Excess Wax
The most effective way to deal with excess wax on waxed cotton is to gently heat the area and carefully wipe away the surplus.
- Apply Heat: Use a hair dryer or a heatgun on a low to medium setting. Hold the heat source a safe distance from the fabric (usually several inches) to avoid scorching or damaging the material. Move the heat source back and forth over the area with too much wax. You will see the excess wax begin to melt and become liquid again.
- Wipe Away: As the wax melts, immediately wipe off the excess with a clean cloth. A lint-free cloth works best. Use a dabbing or light wiping motion to absorb the melted wax. You may need to use different sections of the cloth or a fresh cloth as you go.
- Repeat if Necessary: If there is still excess wax, repeat the heating and wiping steps until the desired finish is achieved.
This technique specifically addresses situations where too much wax has been applied, allowing you to redistribute or remove the surplus effectively.
