Installing replacement glass in a steel window frame typically involves preparing the frame, removing the old glass, and then fitting the new pane. Based on the provided steps, the process focuses on replacing existing glass, culminating in the installation of the new piece.
The general steps outlined for this task guide you through the necessary preparations and removal process before the final installation.
Steps for Glass Installation
Following the provided sequence, the process for installing glass into a steel window frame involves several key stages, starting with preparation and removal of the old pane.
-
Take Measurements:
- Before you can install the correct window glass, it is essential to determine the appropriate size you need to cut. Accurate measurements ensure the new glass fits snugly and securely within the steel frame opening.
-
Gather Materials:
-
Preparation requires having the necessary tools and safety gear on hand. The reference specifically mentions gathering materials including Thick safety gloves. Other tools might be needed depending on the frame and sealant type, but gloves are highlighted for safety.
-
Essential Material Mentioned:
| Item | Purpose |
| :--------------- | :--------------- |
| Thick safety gloves | Hand protection |
-
-
Remove Putty:
- Often, old glass is held in place with glazing putty or a similar compound. This step involves removing the putty from around the edges of the glass pane to loosen it from the frame.
-
Take Out Spring Clips:
- In addition to putty, steel frames frequently use small metal spring clips inserted into grooves or holes in the frame to help hold the glass securely against the frame rebate before the putty cures. These clips must be carefully removed.
-
Remove the Glass:
- Once the putty and clips are removed, the old glass pane can be taken out. This step requires caution, especially if the glass is broken, to prevent injury.
-
Install Window Glass:
- This is the final step where the newly cut glass (based on the initial measurements) is placed into the prepared steel frame opening. The method for securing it typically involves reversing the removal process, often using new putty and potentially reinstalling or replacing spring clips, though the provided reference simply lists this as the action: Install window glass.
By following these steps, you prepare the steel frame and opening to receive the new glass pane, ensuring a proper fit and facilitating the final installation.
