To accurately measure for a new window screen frame, you need to measure the existing window frame channels and do some minor adjustments. Here's how:
Measuring Your Window Screen Frame
Here’s a step-by-step guide using the information from the reference provided to accurately measure your window screen frame:
-
Measure the Width:
- Locate the screen channels: Identify the channels on your window frame where the screen sits.
- Measure the distance: Use a measuring tape to measure the distance between the inside edges of these channels. This measurement gives you the screen's rough width.
- Subtract the adjustment: Subtract 1/8 inch from this measurement. This adjustment is necessary to ensure the new screen fits comfortably in the channel without being too tight.
For example, if the channel-to-channel distance is 25 inches, the screen width should be 24 7/8 inches.
-
Measure the Height:
- Raise the window sash: Open your window partially so that you can access the lip (ridge) of the window frame that holds the screen.
- Measure from the lip: Measure from the bottom of this lip up along the screen channel to the point where the window sash sits when fully closed. This measurement provides the screen height.
Summary Table for Measuring Screen Frame
| Dimension | Measurement Method | Adjustment |
|---|---|---|
| Width | Distance between screen channels on window frame | -1/8 inch |
| Height | From lip along screen channel to the window sash when fully closed. | None |
Additional Tips
- Double-Check: Always measure at least twice to ensure your measurements are accurate. Inaccurate measurements can result in a screen that doesn't fit.
- Record Measurements Carefully: Write down the width and height dimensions clearly to avoid confusion when ordering or building the new screen.
By following these steps, you can accurately measure for new window screens and ensure they fit correctly in your window frame.
