Installing shades inside a mount generally involves a few key steps. The provided video excerpt only details installing the shade handle, but we can infer the broader process and address it here.
The video describes installing the handle after the shade is presumably already mounted. Therefore, this answer will address the installation of the shade itself into the inside mount, then adding the handle.
Here's a breakdown of the typical steps:
-
Prepare the Inside Mount: Ensure the inside of your window frame (the mount) is clean and free of any obstructions. Measure the width and height of the inside of the frame to confirm your shades will fit. Accurate measurements are crucial.
-
Attach Mounting Brackets (if necessary): Some inside mount shades require mounting brackets. These are usually small pieces of hardware that attach to the inside of the window frame. Follow the manufacturer's instructions for positioning and screwing in the brackets. The location and type of bracket depends entirely on the style of shade.
-
Position the Shade: Carefully align the headrail (the top part of the shade) with the inside mount or the mounting brackets (if used).
-
Secure the Shade:
- For Shades with Integrated Mounting Hardware: Some shades have built-in clips or mechanisms that snap directly into the inside of the window frame. You'll need to push or rotate the shade to lock it into place.
- For Shades with Mounting Brackets: The headrail will typically clip into the pre-installed brackets. Ensure the shade is securely attached to the brackets.
-
Test the Shade's Operation: Once the shade is installed, test its functionality. Raise and lower it to ensure it moves smoothly and is properly aligned. Make any necessary adjustments.
-
Install the Handle (or Pull Cord): As the video demonstrates, install the handle. Position the handle at an angle so it's hooked to the bottom of the bottom rail, then push it upwards to snap it into place. This assumes your shade requires a handle, as some use cords or are cordless.
Important Considerations:
- Read the Manufacturer's Instructions: Always refer to the specific instructions provided with your shades. Installation methods can vary significantly depending on the brand and style of shade.
- Hardware: Make sure you have the correct screws and hardware for your window frame material.
- Leveling: Use a level to ensure the headrail is perfectly horizontal. This is essential for proper shade operation and appearance.
