Closing vertical blinds is primarily achieved by rotating the individual slats so they overlap, blocking light and providing privacy.
This is typically done using a control mechanism attached to the blinds, most commonly a wand or a cord.
Using a Wand to Close Blinds
Most modern vertical blinds use a wand.
- Locate the wand: This is usually a rod hanging near the first slat.
- Twist the wand: Gently twist the wand in either direction. As you twist, the slats will begin to rotate.
- Turn until closed: Continue twisting until the slats are positioned vertically and overlap one another, forming a solid barrier.
Using a Cord to Close Blinds
Older or some specific types of vertical blinds may use a cord system.
- Locate the cords: There are usually two sets of cords. One controls opening/closing the blinds by pulling them across the window, and the other controls the rotation of the slats. Focus on the rotation cords.
- Pull the cord: Gently pull one side of the cord loop. This action will cause the slats to rotate.
- Turn until closed: Pull the cord until the slats are fully rotated into a vertical, overlapping position.
Turning Direction for Privacy
Regardless of whether you use a wand or a cord to rotate the slats, the method for achieving privacy is the same: turning the slats so they lie flush against each other.
As the reference states, you can turn vertical blinds in either direction to achieve privacy. Whether you turn them to the left or the right, the slats will still lie flush against each other, minimizing the possibility of gaps as long as they are not disturbed by strong winds or accidental knocks.
Practical Tips for Closing
- Always operate the controls gently to avoid damaging the mechanism or the slats.
- Ensure the blinds are fully pulled across the window (covering the opening) before rotating the slats to close them.
Closing vertical blinds provides effective light control and ensures your indoor space remains private from outside view.
