askvity

How to Reset TCP/IP on Windows 10?

Published in Windows Networking 2 mins read

Resetting the TCP/IP stack on Windows 10 can resolve network connectivity issues. Here's how to do it:

Steps to Reset TCP/IP on Windows 10

Here’s a step-by-step guide to reset your TCP/IP using the Command Prompt:

  1. Open Command Prompt:

    • Click the Start button located in the bottom left corner of your screen.
    • Type Command Prompt in the search bar.
    • Right-click on "Command Prompt" and select Run as administrator. This ensures that you have the necessary permissions to make changes.

  2. Allow Changes:

    • If prompted, click Yes to allow the Command Prompt to make changes to your computer. This is necessary for the reset command to work.

  3. Execute the Reset Command:

    • In the Command Prompt window, type the following command exactly: netsh int ip reset
    • Press Enter. This command will reset the TCP/IP stack to its default settings.

What to Expect After Resetting

  • Potential Disconnection: Your network connection might be temporarily interrupted during the reset.
  • Restart Required: You will need to restart your computer for the changes to take full effect.
  • Default Settings: The TCP/IP settings will be restored to their default state.
  • Troubleshooting: This action can help resolve various network issues, such as the inability to connect to websites or local network devices.

Why Reset TCP/IP?

Sometimes, network configurations become corrupted, causing connection problems. Resetting the TCP/IP stack can often fix these issues. This is a common troubleshooting step recommended when experiencing network connectivity problems.

Here are some situations where resetting the TCP/IP stack could be helpful:

  • Website Unavailability: When you cannot access certain websites while other devices on the same network can.
  • DNS Issues: When you are experiencing problems with DNS resolution.
  • Network Conflict: When there is a possible conflict within the network stack.
  • IP Address Problems: When your device isn't obtaining a valid IP address.

By following these steps, you can effectively reset your TCP/IP settings on Windows 10 and potentially resolve your network-related problems. Remember to reboot your computer after executing the command.

Related Articles