How to Remove Magnet Wire Insulation?

You can remove magnet wire insulation using heat or sandpaper.

Methods for Removing Magnet Wire Insulation

Here are the methods, based on the provided reference, to effectively strip the insulation from magnet wire:

Using Heat

• Heat can be used to burn off the insulation. This method is often used in soldering.

Using Sandpaper

• Abrasive Removal: You can use sandpaper to mechanically remove the insulation.
• Sandpaper Grit: The reference suggests using 100 grit sandpaper for this purpose.
  • Rub the wire against the sandpaper to wear away the insulating layer.

Step-by-step guide using Sandpaper

1. Prepare the Sandpaper: Place a piece of 100-grit sandpaper on a flat, stable surface.
2. Position the Wire: Hold the magnet wire perpendicular to the sandpaper.
3. Sand: Rub the wire against the sandpaper using a back-and-forth motion. Rotate the wire as you go to ensure all sides are evenly stripped.
4. Inspect: Check the wire to make sure all insulation is removed and the bare wire is visible.
5. Repeat if necessary: Repeat steps 3 and 4 until the wire is completely stripped.

Method	Description
Heat Method	Burn off the insulation with heat.
Sandpaper	Physically abrade the coating away with sandpaper.