To turn on a wok burner, you typically need to light the inner ring of the burner first, ensuring the flame heats the thermocouple. This allows the gas to continue flowing.
Detailed Steps (General):
While specific instructions can vary depending on the wok burner model, here are the general steps:
- Locate the Gas Control Knob: Find the knob that controls the gas flow to the wok burner.
- Push and Turn: Many wok burners have a safety feature that requires you to push in the control knob while turning it to the "ignite" or "low" setting.
- Ignite the Burner:
- With Electronic Ignition: If your burner has electronic ignition, there will typically be a button to press while turning the knob. Press and hold the button until you see a spark and the burner ignites.
- With Manual Ignition: If it's a manual ignition, use a lighter or match to ignite the burner. Position the flame near the burner ports while turning the gas control knob.
- Focus on the Inner Ring: It's crucial that the inner ring of the burner lights up first. This flame is often responsible for heating the thermocouple.
- Heat the Thermocouple: The thermocouple is a safety device that detects the presence of a flame. If the flame is detected, it allows the gas to continue flowing. If the thermocouple doesn't get hot enough, the gas supply will shut off.
- Adjust the Flame: Once the burner is lit and the thermocouple is heated, you can adjust the flame to the desired intensity using the control knob.
Why the Inner Ring is Important:
The inner ring's primary function is often to heat the thermocouple. Without the inner ring lit, the thermocouple won't register the flame, and the gas supply will be cut off, preventing the burner from staying lit.
Troubleshooting:
- No Spark: If using electronic ignition, check the power source (battery or electrical connection).
- No Gas Flow: Make sure the main gas supply is turned on.
- Dirty Burner Ports: Clean the burner ports with a wire brush or needle to remove any debris that might be blocking the gas flow.
- Faulty Thermocouple: A faulty thermocouple will prevent the gas from flowing, even if the burner is lit. This may require professional repair.
