Using water-based wood polish typically involves preparing the wood surface and applying multiple coats according to a specific finishing system.
There are different approaches to using water-based (WB) wood polish, often involving other products like fillers, sealers, and stains to achieve the desired look and durability. Here are two options based on the provided references:
Here are two distinct methods you can follow when applying water-based wood polish, as suggested by the references.
Option 1: Building on NC Base
This method involves using traditional Nitrocellulose (NC) products for preparation before applying the water-based polish as a topcoat.
- Surface Preparation: Begin by preparing the wood surface thoroughly. This usually involves sanding and cleaning to ensure it is smooth and free of dust or debris.
- Apply NC Wood Filler: Use an NC Wood filler to fill any pores or imperfections in the wood grain. This creates a smooth base.
- Apply NC Sealer: Apply an NC sealer over the filler and wood. The sealer helps to seal the wood, provide a base for subsequent coats, and ensure uniform absorption.
- Apply Wood Stain (Optional but listed): If you desire a colored finish, apply a Wood stain at this stage according to the product instructions.
- Apply WB Wood Polish: Finally, apply 2 coats of WB Wood polish as the protective and finishing layer. Ensure adequate drying time between coats.
Option 2: All Water-Based System
This method utilizes water-based products throughout the process, using different types of WB polish for sealing and topcoating.
- Apply WB Matt Polish (as Sealer): Start by applying 2 coats of WB matt polish. In this system, the matt polish acts as a sealer, providing the initial base and sealing the wood.
- Use WB Timber Filler: After the sealer coats have dried, use WB Timber filler to fill the pores of the wood. This is done after the initial sealing coat in this method.
- Apply WB Glossy Polish (as Topcoat): For a high-gloss finish, apply 2 coats of WB Glossy polish as the topcoat. This provides the final protective layer and the desired gloss level.
Choosing the right method depends on the desired finish, the existing wood surface, and compatibility between products. Always follow the specific instructions provided by the polish manufacturer for best results.
