Using Flash wood floor cleaner is a simple process that involves diluting the product correctly and applying it to the floor surface.
To effectively clean your wood floors with Flash cleaner, follow these two main steps: dilution and application.
Step 1: Dilute the Cleaner
The first crucial step is to prepare the cleaning solution by mixing the concentrated cleaner with water.
- Measure: Carefully measure the required amount of Flash wood floor cleaner.
- Mix: Mix 1/4 cup of cleaner with 5 liters of water. This dilution ratio ensures the cleaner is effective for lifting dirt without leaving excessive residue that could damage the wood or finish over time.
Using the correct dilution prevents sticky build-up and ensures a streak-free clean, protecting your wood floor investment.
Step 2: Apply the Solution
Once the cleaning solution is ready, it's time to apply it to the floor surface.
- Choose Method: You can apply the solution using a mop or a cloth.
- Apply: Mop or wipe the solution onto the wood floor surface. Ensure your mop or cloth is well wrung out so it is damp, not soaking wet. Excessive moisture can be harmful to wood floors.
- Clean: Gently clean the floor surface, focusing on soiled areas.
- Rinse (Optional): For best results, you might want to go over the floor again with a clean, damp mop or cloth rinsed in plain water to remove any lingering residue, although often a properly diluted solution doesn't require rinsing.
- Dry: Allow the floor to air dry completely, or if needed, gently dry with a clean, soft cloth.
Quick Guide Table
| Step | Action | Details |
|---|---|---|
| Dilute | Mix cleaner with water | 1/4 cup cleaner with 5 liters of water |
| Apply | Clean floor with prepared solution | Mop or wipe onto the wood floor surface (use a damp, not wet, mop/cloth) |
Following these steps helps maintain the beauty and longevity of your wood floors.
