Using liquid cleaner wax typically involves preparing the surface, applying the product, allowing it to dry, and optionally polishing it. Based on the provided reference for a specific Liquid Wax Cleaner used on wood surfaces, here is the exact process.
For surfaces like wood floors, applying a liquid cleaner wax requires careful preparation and application for the best results. The process ensures the surface is clean before the wax is applied, the wax is spread evenly, and it has adequate time to dry and cure.
Here are the steps for using the Liquid Wax Cleaner as outlined in the reference:
Step-by-Step Application Guide
Follow these steps carefully to effectively use the Liquid Wax Cleaner:
- Prepare the Surface: Begin by thoroughly cleaning the wood surface. As specified, use a dedicated wood cleaner like Osmo Wash & Care and wipe the area dry. A clean surface is crucial for the wax cleaner to adhere properly and provide an even finish.
- Apply the Cleaner Wax: Using an appropriate applicator, such as a MicroPad, work the Liquid Wax Cleaner into the surface. Apply a thin and even coat across the entire area you are treating. Ensure consistent coverage to avoid streaks or uneven sheen.
- Allow for Drying: Let the Liquid Wax Cleaner dry completely. The drying time is approximately 1 hour. It is important to allow for good ventilation during this period to help the product cure effectively. Avoid walking on or using the surface while it is drying.
- Optional Polishing: Once the cleaner wax has fully dried, you have the option to polish the surface. Polishing can help to raise the sheen, giving the wood a more lustrous appearance if desired.
Application Summary Table
| Step | Action | Notes |
|---|---|---|
| 1. Cleaning | Clean wood surface with Osmo Wash & Care and wipe dry. | Essential for proper adhesion and finish. |
| 2. Application | Use a MicroPad to apply a thin, even coat of Liquid Wax Cleaner. | Consistency is key for an even look. |
| 3. Drying | Allow approx. 1 hour drying time. Ensure good ventilation. | Do not disturb the surface during drying. |
| 4. Polishing (Opt.) | Can be polished to raise sheen, once dried. | Optional step for enhanced gloss. |
Following these instructions ensures the effective use of the Liquid Wax Cleaner on your wood surfaces, providing both cleaning and protection benefits. Always refer to the specific product's label for any additional safety or usage recommendations.
