To remove ink from a wooden floor, apply some 90% alcohol to the stain using a cloth.
Ink stains on wooden floors can be a stubborn problem, but the correct approach can help lift the mark without damaging the wood finish. Based on expert advice, the recommended method specifically for ink involves a common household item with high alcohol content.
Method for Ink Stain Removal
The primary technique involves using a specific type of alcohol.
- Apply 90% Alcohol: Use a clean, soft cloth and dampen it with 90% alcohol.
- Blot the Stain: Gently blot or rub the ink stain with the alcohol-dampened cloth. Avoid excessive rubbing, which could spread the ink or damage the finish.
- Repeat if Necessary: You may need to repeat the process, using a clean section of the cloth each time, until the ink begins to lift.
- Wipe Clean: After the stain is removed or significantly lightened, wipe the area with a clean, damp cloth (use minimal water) and then dry immediately with another clean, dry cloth.
Note: It's always advisable to test this method on an inconspicuous area of the floor first to ensure it doesn't adversely affect the finish.
Understanding Different Stain Types
While 90% alcohol is recommended for ink, other types of stains on wooden floors require different cleaning agents. The table below summarizes methods for various common stains as provided in guidance:
| Stain Type | Recommended Cleaning Agent | Application Method | Notes |
|---|---|---|---|
| Ink stains | 90% alcohol | Apply to stain using a cloth | Specific recommendation for ink. |
| Chocolate or glue | Mild detergent mixed with water | Rub stain using a cloth dipped in solution | Suitable for sticky/greasy stains. |
| Cat or dog urine | Acetic acid solution (like vinegar) | Use a sponge soaked in solution | Use a 20% acid to 80% water ratio. |
By using the appropriate cleaning method for each type of stain, you can effectively address spills on your wooden floors. For ink, remember that 90% alcohol applied with a cloth is the go-to solution.
