According to the provided reference, essential steps and considerations when cutting a slot on a router table involve specific guidance techniques and bit capabilities.
Key Considerations from the Reference
Based on the provided information, successfully cutting a slot involves paying attention to how the workpiece is guided and ensuring the router bit meets a minimum depth requirement.
Workpiece Guidance
A critical aspect highlighted is workpiece handling during the cut. You "must remember make sure to keep the same edge. Against the fence." This emphasizes the need for consistency, ensuring the same side of your material maintains contact with the router table fence throughout the entire pass. This technique helps produce a straight and parallel slot.
Bit Capability
The reference also specifies a minimum requirement for the router bit being used. Your bit must be capable of cutting "at least halfway through the thickness of the workpiece." This indicates that the bit's effective cutting depth needs to be sufficient relative to the material thickness you are working with.
Here's a summary of these points:
| Aspect | Requirement/Tip Derived from Reference |
|---|---|
| Guidance | Always keep the same edge of the workpiece against the fence. |
| Bit Depth | Bit must cut at least halfway through the workpiece thickness. |
Following these guidelines, as presented in the reference, is crucial for achieving accurate results when routing slots.
