To attach a zipper pull (also known as a slider), you guide the bottom ends of the zipper tape into the opening of the pull and push them through. The specific method can vary, but a common approach, sometimes aided by tools, involves threading both sides of the zipper tape into the slider simultaneously.
Understanding the Process
Attaching a zipper pull requires carefully aligning the two halves of the zipper tape and feeding them into the slider's lower opening. The goal is for the slider to grip the teeth on both sides so it can move up and down to join or separate the zipper.
Method Using a Tool (as seen in reference)
Based on the reference, one technique involves using a tool, such as a fork, to assist in the process.
- Prepare the Zipper: Ensure the bottom ends of the zipper tape are aligned.
- Position the Tool: Place the fork's tines over the zipper tape, potentially holding the two halves steady or slightly apart near the bottom where the slider will attach.
- Insert the Slider: Position the zipper pull (slider) at the very bottom of the zipper, directly below the fork (if using one).
- Feed the Tape: Carefully guide the fabric and teeth of both sides of the zipper tape into the bottom opening of the slider.
- Push Through: As highlighted in the reference, then push both sides through the pull. This action feeds the tape and teeth into the slider until they emerge from the top opening, allowing the slider to move freely.
This method, potentially using a fork or similar tool, can help stabilize the zipper ends and make it easier to feed both sides into the pull evenly.
General Steps for Attaching a Zipper Pull
Whether you use a tool or just your fingers, the fundamental steps are:
- Align the two separate sides of the zipper tape at their very bottom ends.
- Identify the correct orientation of the zipper pull (it should face the outside of the garment/item).
- Insert the aligned ends of both zipper tapes into the wider, lower opening of the slider.
- Work the tape through the slider, gently pushing or wiggling, until the fabric and teeth emerge from the top, narrower end.
- Once both sides are through, you should be able to zip the pull upwards to close the zipper.
Successfully attaching the pull means both sides of the zipper tape are correctly threaded through the slider, ready for zipping.
